Gasoline saws are used in many places, and sometimes we can't pull the sound during the application process. What is the reason? Be able to seriously analyze the specific situation, find the internal reasons, and then solve the problem to ensure smoother subsequent use.

 

The problem that the gasoline saw does not sound, we need to see if it can be ignited normally. If it can be ignited, it means that there is no problem when igniting, but if it cannot be ignited, you can check the high-pressure package above and see a Check to see if it is broken, and if it is broken, replace it directly. Further identification of the ignition problem can then select such a solution.

 

For these situations where the gasoline saw can't be pulled, you should also check to see if there is pressure in the cylinder above. In normal times, you can directly disassemble the spark plug, and block the position of the spark plug with the middle finger of your finger, and then pull it to start, you can feel whether there is pressure here, if there is no pressure, this proves to be the cylinder part of the problem. .

There are many reasons for the problem of no sound when using gasoline saws, and we can solve the problem after analyzing the specific reasons. When buying equipment, you should also take a look at the quality of these equipment. You can buy those products with better quality, higher cost performance and better after-sales service. If there is a problem in future use, you can get it in time. It can also reduce a lot of trouble, so everyone should try to understand these. After encountering a problem, choose an appropriate solution to ensure that the device can work normally and will not affect many subsequent things.