Lawn mower cutter, engine, walking round, running gear, blade, handrails, control parts.

How it works: the cutter mounted on walking round cutter fitted with engines, the engine output shaft with blades, high-speed rotation of the engine to trim the lawn.

The conditions of use:

2000 square meters of lawn can use hand-push lawn mowers, 2000 or more than 2000 square meters of lawn, you can use self-propelled lawn mowers, lawn, trees and more obstacles, you can choose the front universal joint lawn mowers. Larger, you can choose a lawn tractor, 1.07 meters (42 inches) lawn tractor in general, apply to the 12,000 to 15,000 square meters of lawn, lawn tractor of 1.17 meters (46 inches) for 20,000 square meters of lawn.

Note: to clear the area

Clear stones, branches, and all kinds of debris. Mark on the nozzle and obstacles.

The Dress: platform shoes, trousers, mainly to prevent the blade playing stones splash wounding.

Venue: slope angle of more than 15 degrees can not lawnmower, to prevent injury and damage to the machinery. Rain and watering and not immediately after the lawnmower to prevent slips and poor mechanical work.

Special emphasis is within 10 meters: the lawnmower job, not anyone, especially the side of the discharge port side row not to tell anyone. Adjust the machinery and down grass must be shut down. Must not be adjusted in the mechanical operation of machinery and down grass.

Height adjustment: to be determined according to the requirements of the lawn lawnmower stubble height, south of the warm-season lawn stubble 3 cm, north of cool-season lawn stubble height of 5 cm. The lawnmower cut height of the original one-third of the height of the grass, grass-cutting can only laterally along the slope pruning, and not along the slope of the upper and lower trim. Be especially careful when turning on the slope. Watch out for obstacles in the caves, trenches and mounds and grass.

The role and use of the safety handle: mower safety control handle control the ceasefire switch of the flywheel brakes and ignition coil. Hold down the the security control handle, release the the flywheel braking device the disconnect the ceasefire switch, gasoline can be up and running. On the contrary, the safety control handle is released, the flywheel is stopped, the cease-fire switch connected to the ignition coil, a gasoline engine shutdown and stopped. That only hold the security control handle, the machine can be normal operation, when the operation in case of emergency, release the safety control handle downtime. So, run, do not line tied safety control handle.

Machinery maintenance: after each work, disconnect the spark plug to prevent clean the cutter rotating blade when the engine itself started.

Check the blade: Lawn mower blades should always grinding stay sharp, trim the lawn to flush nice cut grass wound, the lawn is not easy to get sick. On the contrary, not only bad manicured lawns, lawn mowers drive shaft resistance increase, increasing the load on the mower and reduced efficiency, increased operating temperatures exacerbate the wear and tear of the machine, so to keep the blade sharp, improve work efficiency and to ensure the normal operation of the machine. The same time, we should always check the lawn mower blade is balanced, unbalanced blade will cause excessive vibration machine, easy to damage the lawn machine parts.

Previous: Mower Note

Next: Introduction to Chainsaws